SRG-1150D/ DN

Features : Compliant with ITU, IMO and GMDSS Compact & transmitter-receiver with a built-in DSC Easy to read information with large LCD( 10.4) for NBDP terminal Easy to read Rx & Tx frequency at a time Available scanning variability of transmitter output, frequency & channel High stability for frequency with 10Hz Step Synthesizer Built-in alarm signal( 2182KHz) Storing up to 100 transmitted message( editable) Storing up to 100 received message ( every 50 messages for distress and ordinary) Self-diagnosis function for easy maintenance Specification : GENERAL Frequence range - TX : 1.6~ 27.5MHz ( 10Hz STEP) - RX : 500KHz~ 29.9999MHz ( 10Hz STEP) TX/ RX channel : ITU channel, 300 memory channel Frequency tolerance : Within 10HZ Type of emission : J3E, H3E, F1B Operation : Simplex & Semi-duplex Ambient temperature & Humidity : -15 ~ + 55 , 95% Power supply : DC24V 15% - ( 2.5A at Reception, 15A at Transmittion / SRG-1150DN) - ( 2.5A at Reception, 25A at Transmittion / SRG-1250DN) DSC WATCH KEEPING RECEIVER Frequency : 2187.5, 4207.5, 6312, 8414.5, 12577, 16804.5KHz Type of emission : F1B Frequency shift keying : 1700 85Hz ( Mark: 1615Hz, Space: 1785Hz) Data transfer speed: 100 baud Frequency tolerance : 10Hz OPTION( NBDP) NBDP TERMINAL ( SN-100) PRINTER ( DPU-414, OKI) KEY BOARD ( SPR-8630) TRANSMITTER Type of emission and output - J3E( 150W) , F1B( 100W) , H3E( 75W) : SRG-1150DN - J3E( 250W) , F1B( 150W) , H3E( 75W) : SRG-1250DN Modulation : Low level balanced Occupied bandwidth : Within J3E( 3KHz) , F1B( 0.5KHz) Two-tone distress signal : 1300, 2100Hz Receiver Sensitivity : J3E 3uV, F1B 3uV, H3E 6uV, S/ N 20dB 100m/ w Intermediate frequency : 49.455MHz, 455KHz Overall distortion and noise : More than 20dB Input impedance : 50? NBDP Protocol : 625, 476-4, 490, 491, 492-3 & F130 by CCIR Communication mode : ARQ, CFEC, SFEC Memory : 16M Middle range of frequency : 1700 Hz Modulation speed : 100 BAUD( ARQ, FEC MODE) Type of modulation : AFSK Frequency tolerance : Within 0.5Hz